home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
001a
/
cspsetup.zip
/
REMOTE.TXT
< prev
next >
Wrap
Text File
|
1991-04-29
|
5KB
|
106 lines
Using the Compucom Speedmodem with RemoteAccess BBS Software:
This is by no means a technical document on all the different ways to
initialize your CompuCom Speedmodem for RA v.10, but a SIMPLE guide...
oo ..Be sure the Speedmodem ROM version is at least 2.51. Type ATI3...
\/ ..from any communications program in TERMINAL mode for results...
..EXAMPLE: (c) Copyright CompuCom 1990 V2.51
oo ..RA REQUIRES a FOSSIL. Be sure to setup your com-port correctly...
\/ ..Refer to your Remote Access documentation, X00.SYS example below.
..Modify CONFIG.SYS with the line, refer to DOS if needed...
..DEVICE=C:\X00.SYS E T=2048 R=2048 1=2F8,IRQ3 B,1,19200...(For Com2)
oo ..Run RACONFIG.EXE then choose MODEM then SETUP...
\/
Modem Other
╤════════════════╤════
│*Setup* │▒▒▒▒
│ Initialization │▒▒▒▒
│ Errorlevels │▒▒▒▒
│ Restrictions │▒▒▒▒
╘════════════════╛▒▒▒▒
╒═══════════════════Setup════════════════════╕
│ │
│ Comport : 2 │
│ Maximum baud : 19200 │
│ Init response : OK │
│ Busy response : OK │
│ Ring string : RING │
│ Error free connect : REL │
│ Connect 300 : CONNECT| │
│ Connect 1200 : CONNECT 1200 │
│ Connect 2400 : CONNECT 2400 │
│ Connect 4800 : CONNECT 4800 │
│ Connect 9600 : CONNECT 9600 │
│ Connect 19k : CONNECT FAST │
│ Connect 38k : CONNECT FASTER │
│ Automatic answer : Yes │
│ Modem delay : 200 │
│ Outbound buffer size : 5 │
│ Send break to clear : No │
│ │
╘════════════════════════════════════════════╛
oo ..Then press ESC and choose Initialization...
\/
Modem Other
╤════════════════╤═══
│ Setup │▒▒▒ ....................
│*Initialization*..... oo ..Actually spelled..
│ Errorlevels │▒▒▒ \/ ..Initiali(s)ation..
│ Restrictions │▒▒▒ ..in Remote Access..
╘════════════════╛▒▒▒ .......(smile)......
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
╒═══════════════════════════Initialisation════════════════════════════╕
│ │
│ Initialization tries : 10 │
│ Initialization string: AT&F2*H2%C0&C1&D2H0S0=0M0&W| │
│ Busy string : ATH1| │
│ Answer string : ATA| │
│ │
╘═════════════════════════════════════════════════════════════════════╛
oo AT&F2 +F *H2%C0 &C1&D2H0S0=0M0 &W
\/ |___| | |____| |____________| |_____WRITE to FIRMWARE!
...| F | |
...| A | Recommended for RA!
...| X |
...| | Depends on error mode wanted ..............
...| O *H1 or *H2 (MNP-5) ...REFER to...
...| F *H1 or *H2%C0 (MNP-4) -|Recommend ... Manual ...
...| F *H1 or *H2\N0 (no MNP)-|either one ..............
...| |
...| For COMBO only, do NOT use on CHAMP. Not Used on roms after 4/1/91
...|
...A must for Speedmodem!
oo ..*H2%C0 can be substituted with other variations...
\/ ..as recommended in the Speedmodem manual...
oo ..If using the COMBO, add +F to the Initialization string...
\/ ..turns fax off on the COMBO, returns ERROR on the CHAMP...
Dialing out:
oo ..RTS-CTS ON, ALL BAUD at 19200, AUTO BAUD DETECT OFF...
\/
...When using a long distance carrier with the Speedmodem...
...call your LD customer service and ask if a "carrier code"...
...is needed for proper "bandwidth" on "asynchronous" connections...
oo ..An example where this code is needed is the US Sprint...
\/ ..FIBER OPTIC NETWORK, to access a ""full-bandwidth" line...
...the code 10333 is needed, that is dial 10333-1-800-000-0000...
...this ensures that the FULL bandwidth is available to you...
...otherwise, a sudden "No carrier" can result...
Well, this by no means covers all the ways to use RA-BBS with a Compucom
Speedmodem. But it should help you initially (pun?). If all else fails,
don't forget to read the doc's!
<End of File>